From: Al Saenz (asaenz@Found-Tech.com)
Date: Thu Jul 28 2005 - 11:48:51 EDT
Thank you Charles for your reply.
Well it seems now I have a fast data access mmu miss also.
I tried new memory and disconnecting the hard drive to make sure that wasn't
the problem.
This system is all messed up. I think the mother board is bad.
I just thought I let everyone know so I don't waste your time.
We are just going to replace the system board.
Thanks everyone,
Al
-----Original Message-----
From: Charles Mengel [mailto:charles.mengel@legnemgroup.com]
Sent: Thursday, July 28, 2005 11:19 AM
To: Al Saenz
Subject: RE: no output from probe-ide
Al -
Do you have a non-Sun supplied disk you've just installed? I've had this
problem when I've tried to install non-Seagate IDE disks into IDE based
systems.
Charles Mengel
LGI -The Legnem Group, Inc
5501 Twin Knolls Rd Suite 107
Columbia MD 21045
410-997-1393
-----Original Message-----
From: sunmanagers-bounces@sunmanagers.org
[mailto:sunmanagers-bounces@sunmanagers.org] On Behalf Of Al Saenz
Sent: Thursday, July 28, 2005 11:07 AM
To: sunmanagers@sunmanagers.org
Subject: no output from probe-ide
Hello Sunmanagers,
I have a Netra AX1105 system with Openboot 4.0.
When I run probe-ide at the ok prompt I get the ok prompt.
Has anyone seen this or now the cause?
Thank you
Al
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:31:12 EDT