From: Kevin Davidson (kdavidson@transaction-one.com)
Date: Wed Jul 20 2005 - 05:41:35 EDT
I didn't actually get any answers to this but I have managed to
resolve the problem. Turns out that my firewall was dropping the ICMP
echo packets used for testing. Adding a couple of static host routes
for testing fixed this, ie
# route add -host <host-ip> <host-ip>
Cheers,
Kevin
-----Original Message-----
From: sunmanagers-bounces@sunmanagers.org
[mailto:sunmanagers-bounces@sunmanagers.org] On Behalf Of Kevin
Davidson
Sent: 19 July 2005 17:10
To: sunmanagers@sunmanagers.org
Subject: IP Multipathing - NIC fails as soon as test address added
Hi,
I am having problems setting up IP Multipathing on a Solaris 8 server
following the guidelines given in the Blueprints document.
I have configured my two primary addresses and added them to the same
group. The problem occurs when I create a 'test' address with the
command
ifconfig hme0 addif gnasher-hme0 netmask + broadcast + \
-failover deprecated up
As soon as I add this, I see two lines in /var/adm/messages
Jul 19 17:06:54 gnasher in.mpathd[339]: [ID 490503 daemon.error]
Failure detection restored on hme0 as an IFF_NOFAILOVER address is
available
Jul 19 17:07:03 gnasher in.mpathd[339]: [ID 594170 daemon.error] NIC
failure detected on hme0 of group production
Any advice would be greatly appreciated, will summarize any replies I
get.
Thanks in advance,
Kevin
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:31:09 EDT