From: Marble, Jeff R (Jeff.Marble@unisys.com)
Date: Fri Jul 15 2005 - 12:59:57 EDT
The short answer: populate /etc/inet/ntp.conf as before and then enter
svcadm enable ntp
Svcs does not list the ntp service until after it has been enabled. A
list of possible services can be found at docs.sun.com in the Solaris 10
System Administrator Collection >> System Administration Guide: Basic
Administration >> A. SMF Services which can be found at:
http://docs.sun.com/app/docs/doc/817-1985/6mhm8o5vd?a=view
Thank you,
Jeff
-----Original Message-----
From: sunmanagers-bounces@sunmanagers.org [mailto:
sunmanagers-bounces@sunmanagers.org] On Behalf Of Marble, Jeff R
Sent: Friday, July 15, 2005 10:09 AM
To: sunmanagers@sunmanagers.org
Subject: ntp on Solaris 10
I need to bring up ntp on a Solaris 10 host. On the previous releases,
you would populate /etc/inet/ntp.conf and run /etc/rc2.d/S74xntpd start
and everything would work.
How is this done on Solaris 10? Svcs and svcadm?
Can anyone help me with this?
Jeff
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:31:08 EDT