From: ashish.achuthan@wipro.com
Date: Mon Jul 18 2005 - 03:14:38 EDT
Folks,
Iam facing some problem with one of my v240.One of the obp parameter was changed.The changed parameter is eeprom boot-file=/platform/sun4u/kernel/sparcv9/unix
These changes were done since the server has a vpn client which needed some modifications.
The box never came up after making these changes.When I connect it using a tip session all I can see is a set of junk characters.Unfortunately this dosen't have a monitor or a terminal or keyboard to see what is happening.I connected a sun keyboard so that I can try stop-n , but keyboard doesen't seems to be responding.When I connect using tip it just responds with junk characters.
bash-2.05$ tip hardwire
connected
pCtZHCb&cBGD~rCpZN~ZZZ{~Z
Is there any way to get ok prompt using my windows keyboard through tip connection?
Please let me know what would have gone wrong and a possible solution to bring this box up.
Waiting for your valuable suggestions.
Regards
Ashish
Confidentiality Notice
The information contained in this electronic message and any attachments to this message are intended
for the exclusive use of the addressee(s) and may contain confidential or privileged information. If
you are not the intended recipient, please notify the sender at Wipro or Mailadmin@wipro.com immediately
and destroy all copies of this message and any attachments.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:31:08 EDT