From: Dave Martini 1 (martini@raider.llnl.gov)
Date: Wed Jun 08 2005 - 13:36:06 EDT
I have a V250 that shows this error in the /var/adm/messages file
rmclomv: [ID 627585 kern.error] ENCLOSURE_FAN @ FT2.F0.RS has FAULTED
But when I run
prtdiag -v
I'm not seeing anything that has failed.
Does that mean that fan faulted only for a short period of time and
then was ok?
Also, if I wanted to create a cron job that did a prtdiag -v
for any failures on the system would it be safe to grep for
the word "failed"? Would that catch all possible problems with the
system?
Here's the fan setion from the prtdiag -v output
============================ Environmental Status ============================
Fan Speeds:
---------------------------------------------
Location Sensor Status Speed
---------------------------------------------
MB RS okay 3708 rpm
MB RS okay 3668 rpm
MB RS okay 2428 rpm
MB RS okay 1804 rpm
MB RS okay 2410 rpm
MB RS okay 1854 rpm
PS0 FF_FAN okay
PS1 FF_FAN okay
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:52 EDT