SUMMARY: Configuring Software RAID0 from shell

From: Yashpal Nagar (yash@linux-delhi.org)
Date: Tue May 03 2005 - 16:35:20 EDT

Next message: Dirk Moolman: "Network usage between 2 servers"
Previous message: Chuck: "SUMMARY: TCP receive window"
In reply to: Yashpal Nagar: "Configuring Software RAID0 from shell"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Thanks to all who replied!

I got RAID0 working
syntax is
metainit <device-name> <striping-no> <total-no-of disks> slice1
slice2...sliceN

In my case it is
metainit d0 1 19 c5t3d0s0 c5t2d0s0 ... c0t1d0s0

newfs /dev/md/rdsk/d0
update vfstab
mount /mount-point

Thanks again
Yash

On Friday 29 Apr 2005 12:25 pm, Yashpal Nagar wrote:
> Hello Sunmanagers!
>
> I have a sun box E450 with 20 SCSI hard disks attached to it. These
> disks are attached with 5 SCSI controllers and there is no harware RAID
> card. Sun solaris 9.0 is installed on its first disk. Server is in
> offshore location. I need to configure a software RAID 0 on the
> remaining disks with remote shell access.
>
> Can anyone help me how to proceed about this.
>
> Thanks in advance
> Yash
> _______________________________________________
> sunmanagers mailing list
> sunmanagers@sunmanagers.org
> http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

Next message: Dirk Moolman: "Network usage between 2 servers"
Previous message: Chuck: "SUMMARY: TCP receive window"
In reply to: Yashpal Nagar: "Configuring Software RAID0 from shell"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:38 EDT