Configuring Software RAID0 from shell

From: Yashpal Nagar (yash@linux-delhi.org)
Date: Fri Apr 29 2005 - 02:55:27 EDT

• Next message: Dirk Moolman: "Debugging process in Unix"
• Previous message: Aditya Nagalla: "How to change nis+ domainname"
• Next in thread: Yashpal Nagar: "SUMMARY: Configuring Software RAID0 from shell"
• Reply: Yashpal Nagar: "SUMMARY: Configuring Software RAID0 from shell"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello Sunmanagers!

  I have a sun box E450 with 20 SCSI hard disks attached to it. These
disks are attached with 5 SCSI controllers and there is no harware RAID
card. Sun solaris 9.0 is installed on its first disk. Server is in
offshore location. I need to configure a software RAID 0 on the
remaining disks with remote shell access.

Can anyone help me how to proceed about this.

Thanks in advance
Yash
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Dirk Moolman: "Debugging process in Unix"
• Previous message: Aditya Nagalla: "How to change nis+ domainname"
• Next in thread: Yashpal Nagar: "SUMMARY: Configuring Software RAID0 from shell"
• Reply: Yashpal Nagar: "SUMMARY: Configuring Software RAID0 from shell"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:37 EDT