From: Rick von Richter (rickv@memec.com)
Date: Tue Apr 19 2005 - 12:36:34 EDT
We are trying to install Solaris 9 12/03 onto a V880 with an attached
E3510. The LUNs have been configured on the E3510 and a regular Sol9
boot from HD shows the LUNs using the 'format' command (see below). The
luxadm command also sees the SES. When we try to do a 'boot cdrom' from
the Sol9 disk 1 CD, the install program starts but it only sees the
internal drives. We want to install onto the E3510 LUNs. Any ideas?
Output from format
==================
bash-2.05# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e0108e7cd1,0
1. c1t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w210000008717dc49,0
2. c1t2d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e0108e81c1,0
3. c1t3d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e0108e78a1,0
4. c1t4d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w2100000c505a19da,0
5. c1t5d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w2100000c505a19bf,0
6. c4t40d0 <SUN-StorEdge3510-327R cyl 26622 alt 2 hd 64 sec 32>
/pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w216000c0ff883b25,0
7. c4t40d1 <SUN-StorEdge3510-327R cyl 30 alt 2 hd 64 sec 32>
/pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w216000c0ff883b25,1
8. c4t40d2 <SUN-StorEdge3510-327R cyl 55622 alt 2 hd 64 sec 64>
/pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w216000c0ff883b25,2
Specify disk (enter its number): 6
selecting c4t40d0
[disk formatted]
format> ve
Primary label contents:
Volume name = < >
ascii name = <SUN-StorEdge3510-327R cyl 26622 alt 2 hd 64 sec 32>
pcyl = 26624
ncyl = 26622
acyl = 2
nhead = 64
nsect = 32
Part Tag Flag Cylinders Size Blocks
0 root wm 0 - 127 128.00MB (128/0/0) 262144
1 swap wu 128 - 255 128.00MB (128/0/0) 262144
2 backup wu 0 - 26621 26.00GB (26622/0/0) 54521856
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 usr wm 256 - 26621 25.75GB (26366/0/0) 53997568
7 unassigned wm 0 0 (0/0/0) 0
Output from luxadm
==================
bash-2.05# luxadm display -v /dev/es/ses0
SUNWGS INT FCBPL
DISK STATUS
SLOT DISKS (Node WWN)
0 On (O.K.) 500000e0108e7cd0
1 On (O.K.) 200000008717dc49
2 On (O.K.) 500000e0108e81c0
3 On (O.K.) 500000e0108e78a0
4 On (O.K.) 2000000c505a19da
5 On (O.K.) 2000000c505a19bf
6 On (Login failed)
7 On (Login failed)
8 On (Login failed)
9 On (Login failed)
10 On (Login failed)
11 On (Login failed)
SUBSYSTEM STATUS
FW Revision:922A Box ID:0
Node WWN:5080020000170560 Enclosure Name:FCloop
SSC100's - 0=Base Bkpln, 1=Base LoopB, 2=Exp Bkpln, 3=Exp LoopB
SSC100 #0: O.K.(922A/ 8D3C)
SSC100 #1: O.K.(922A/ 8D3C)
SSC100 #2: Not Installed
SSC100 #3: Not Installed
Temperature Sensors - 0 Base, 1 Expansion
0:26:C
1Not Installed
Backplanes - A=Base, B=Expansion
A: O.K.
B: Not Installed
Default Language is USA English, ASCII
This message contains confidential information and is intended only for
the individual named. If you are not the named addressee you should not
disseminate, distribute or copy this e-mail. Please notify the sender
immediately by e-mail if you have received this e-mail by mistake and
delete this e-mail from your system. E-mail transmission cannot be
assured to be secure or correct as information could be
intercepted, corrupted, lost, destroyed, arrive late or incomplete, or
contain viruses. The sender therefore does not accept liability for any
errors or omissions in the contents of this message, which arise as a
result of e-mail transmission. If verification is required please
request a hard-copy version.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:34 EDT