From: sanjay K (sanjayk@sunguru.com)
Date: Mon Apr 18 2005 - 04:26:41 EDT
Hello ,
My question is if there ntp not configured on the servers ,
The way we set the time on the non-cluster systems , the same way can we
set the time or we have do to shutdown of the cluster on the one of the
node & then set the time ?
I hope all of you suggested is to do the ntp configuration. my question
is if n tp is not there ? then how to set the time?
sanjay
--- Alfredo De Luca <deluca.a@bigpond.net.au> wrote:
From: Alfredo De Luca <deluca.a@bigpond.net.au>
Date: Sun, 17 Apr 2005 01:18:01 +1000
To: sanjayk@sunguru.com
Subject: Re: how to set time on the cluster nodes
Have a look on this link..
http://docs.sun.com/app/docs/doc/817-6543/6mlu3j9gc?a=view
< BR>see ya
sanjay K wrote:
>Hi Sunmanagers,
>
>We have a setup of two cluster node,solaris 8 running.
>
>I am aware normally on the standalone systems(non-cluster) with
>the "date" command the time can be set.But on these cluster if i have to
>set the time , is it require to shutdown the nodes & then boot in
>non-cluster mode & then set the date ?
>
>Can you please tell me the procedure to set the time on cluster nodes.
>
>Thanks in advance
>
>sanjay
>________________________________________ _______
>sunmanagers mailing list
>sunmanagers@sunmanagers.org
>http://www.sunmanagers.org/mai lman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:33 EDT