From: Trung Hieu (nth5709@hcm.vnn.vn)
Date: Mon Apr 18 2005 - 06:11:35 EDT
Hi.
Need issues from experts about my SF880 system. Thankx.
Hieu
-----------------------------------------------------------------------
Probing Motherboard....part# 501-6771-02 serial#
Safari min 100MHz, cumulative 100MHz; max 150MHz, cumulative 150MHz
'STICK' clock 10MHz; BootBus timing 014f.99fd.a7e6.3f29
Probing I/O Board......part# 501-5142-15 serial# 027148
Probing System RSC.....part# 501-5856-06 serial# 096268
Probing PwrDistBoard...part# 375-0071-02 serial# N22145
Probing PowerSupply0...part# 300-1353-02 serial# M78076
Probing PowerSupply1...part# 300-1353-02 serial# M78068
Probing PowerSupply2...part# 300-1353-02 serial# M78069
Probing GPTwo Slot A...part# 501-6334-02 serial# 026413
Safari min 100MHz, cumulative 100MHz; max 150MHz, cumulative 150MHz
CPU rated speed 900MHz; ECache 8MB 3.3ns
Probing GPTwo Slot B...No module detected
Probing GPTwo Slot C...No module detected
Probing GPTwo Slot D...No module detected
Desired Safari Bus speed 150MHz, selecting 150MHz
Configuring CPUs..........
... CPU0 Rated Speed 900MHz, Safari 150MHz, want 6:1, got 6:1 ==> CPU
900MHz
Ecache 8MB 3.3ns mode=3-3-3 2-way ECCR: 0000.0000.0309.4400
... CPU2 Rated Speed 900MHz, Safari 150MHz, want 6:1, got 6:1 ==> CPU
900MHz
Ecache 8MB 3.3ns mode=3-3-3 2-way ECCR: 0000.0000.0309.4400 ...Done
Setting system speed (and resetting)...
<*>
Set Speed Reset
@(#)OBP 4.6.3 2002/05/28 09:09 Sun Fire 880
Front Panel Keyswitch is in Diagnostic position.
Online: CPU0 Ultra-III+ (v2.2) 6:1 900MHz 8MB 3:1 ECache
Online: *CPU2 Ultra-III+ (v2.2) 6:1 900MHz 8MB 3:1 ECache
Executing Power On SelfTest w/%o0 = 0000.0000.0001.2042
0>@(#) Daktari POST 4.6.2 2002/05/21 10:41
/dat/fw/work/staff/firmware_re/post/post-build-4.6.2_020521/Camelot/daktari/integrated
(firmware_re)
0>Jump from OBP->POST.
0>CPUs present in system: 0 2
0>Keyswitch in DIAGNOSTIC POSITION.
0>Diag level set to MIN.
0>MFG scrpt mode set NORM
0>I/O port set to serial TTYA.
0>
0>Start selftest...
0>Init CPU
0> Cheetah_plus Version 2.2
0>DMMU Registers Access
0>DMMU TLB DATA RAM Access
0>DMMU TLB TAGS Access
0>IMMU Registers Access
0>IMMU TLB DATA RAM Access
0>IMMU TLB TAGS Access
0>Probe Ecache
0> Size = 00000000.00800000...
0>Ecache Data Bitwalk
0>Ecache Address Bitwalk
0>Scrub and Setup Ecache
0>Setup and Enable DMMU
0>Setup DMMU Miss Handler
0>Test and Init Temp Mailbox
2>Init CPU
2> Cheetah_plus Version 2.2
2>DMMU Registers Access
2>DMMU TLB DATA RAM Access
2>DMMU TLB TAGS Access
2>IMMU Registers Access
2>IMMU TLB DATA RAM Access
2>IMMU TLB TAGS Access
2>Probe Ecache
2> Size = 00000000.00800000...
2>Ecache Data Bitwalk
2>Ecache Address Bitwalk
2>Scrub and Setup Ecache
2>Setup and Enable DMMU
2>Setup DMMU Miss Handler
2>Test and Init Temp Mailbox
0>Initializing Scan Database
0>Mask DAR errors off
0>Init MDR DTL
0>Init DAR DTL
0>Enable Partial DAR error
0>Init DCS DTL
0>Init I2C
0>Unquiesce Safari
0>Margin all voltages to nominal
0>Scan ring integrity
0>INFO: H/W under test = CPU Board Slot B (Cheetah 1, DCDS [0-7], SRAMs)
Scan Ring NOT Present or Shut OFF
0>INFO: H/W under test = CPU Board Slot B (Cheetah 3, SRAMs) Scan Ring
NOT Present or Shut OFF
0>INFO: H/W under test = CPU Board Slot C (Cheetah 4, DCDS [0-7], SRAMs)
Scan Ring NOT Present or Shut OFF
0>INFO: H/W under test = CPU Board Slot D (Cheetah 5, DCDS [0-7], SRAMs)
Scan Ring NOT Present or Shut OFF
0>INFO: H/W under test = CPU Board Slot C (Cheetah 6, SRAMs) Scan Ring
NOT Present or Shut OFF
0>INFO: H/W under test = CPU Board Slot D (Cheetah 7, SRAMs) Scan Ring
NOT Present or Shut OFF
0>Set Trip Temp CPU 0 to 110C
0>Set Trip Temp CPU 2 to 110C
0>FRI APR 8 12:10:02 GMT 5
0>Safari quick check
0> to IO-bridge_0
0> to IO-bridge_1
0>Safari full check
0> to IO-bridge_0
0> to IO-bridge_1
0>ERROR: TEST = Safari full check
0>H/W under test = Motherboard/Centerplane Safari, CPU Slot A
0>MSG = ERROR: IO-Bridge Fault Check 0.
0>END_ERROR
0>ERROR: TEST = Safari full check
0>H/W under test = Motherboard/Centerplane Safari, CPU Slot A
0>MSG = IO-Bridge Error - PCI A AFSR Reg,
address 00000400.04f02010
observed 80000030.40000000
0>END_ERROR
0>ERROR: TEST = Safari full check
0>H/W under test = Motherboard/Centerplane Safari, CPU Slot A
0>MSG = IO-Bridge Error - PCI A AFAR Reg,
address 00000400.04f02018
observed 00000000.00000800
0>END_ERROR
0>ERROR: TEST = Safari full check
0>H/W under test = Motherboard/Centerplane Safari, CPU Slot A
0>MSG = ERROR: IO-Bridge Fault Check 0.
0>END_ERROR
0>ERROR: TEST = Safari full check
0>H/W under test = Motherboard/Centerplane Safari, CPU Slot A
0>MSG = IO-Bridge Error - PCI B CNTL Reg,
address 000007ff.ea000006
observed 2280
0>END_ERROR
0> FAILED
0>Disable Cheetah 0 error checking
0>Disable Cheetah 2 error checking
0>Probe and Setup Memory
0>INFO: 512MB Bank 0
0>INFO: 512MB Bank 1
0>INFO: 512MB Bank 2
0>INFO: 512MB Bank 3
0>
0>Data Bitwalk on Master
0> Test Bank 0.
0> Test Bank 1.
0> Test Bank 2.
0> Test Bank 3.
0>Address Bitwalk on Master
0>INFO: Addr walk mem test on CPU 0 Bank 0: 00000000.00000000 to
00000000.20000000.
0>INFO: Addr walk mem test on CPU 0 Bank 1: 00000001.00000000 to
00000001.20000000.
0>INFO: Addr walk mem test on CPU 0 Bank 2: 00000002.00000000 to
00000002.20000000.
0>INFO: Addr walk mem test on CPU 0 Bank 3: 00000003.00000000 to
00000003.20000000.
0>Set Mailbox
0>Setup Final DMMU Entries
0>Post Image Region Scrub
0>Run POST from Memory
0>Verifying checksum on copied image.
0>The Memory's CHECKSUM value is 77b8.
0>The Memory's Content Size value is 91bc2.
0>Success... Checksum on Memory Validated.
2>Probe and Setup Memory
2>INFO: 512MB Bank 0
2>INFO: 512MB Bank 1
2>INFO: 512MB Bank 2
2>INFO: 512MB Bank 3
2>
2>Set Mailbox
0>Data Bitwalk on Slave 2
0> Test Bank 0.
0> Test Bank 1.
0> Test Bank 2.
0> Test Bank 3.
0>Address Bitwalk on Slave 2
0>INFO: Addr walk mem test on CPU 2 Bank 0: 00000020.00000000 to
00000020.20000000.
0>INFO: Addr walk mem test on CPU 2 Bank 1: 00000021.00000000 to
00000021.20000000.
0>INFO: Addr walk mem test on CPU 2 Bank 2: 00000022.00000000 to
00000022.20000000.
0>INFO: Addr walk mem test on CPU 2 Bank 3: 00000023.00000000 to
00000023.20000000.
2>Setup Final DMMU Entries
2>Map Slave POST to master memory
2>Print Mem Config
2>Caches : Icache is ON, Dcache is ON, Wcache is ON, Pcache is ON.
2>Memory in non-interleave config:
2> Bank 0 512MB : 00000020.00000000 -> 00000020.20000000.
2> Bank 1 512MB : 00000021.00000000 -> 00000021.20000000.
2> Bank 2 512MB : 00000022.00000000 -> 00000022.20000000.
2> Bank 3 512MB : 00000023.00000000 -> 00000023.20000000.
0>Print Mem Config
0>Caches : Icache is ON, Dcache is ON, Wcache is ON, Pcache is ON.
0>Memory in non-interleave config:
0> Bank 0 512MB : 00000000.00000000 -> 00000000.20000000.
0> Bank 1 512MB : 00000001.00000000 -> 00000001.20000000.
0> Bank 2 512MB : 00000002.00000000 -> 00000002.20000000.
0> Bank 3 512MB : 00000003.00000000 -> 00000003.20000000.
2>Scrub Memory
0>Scrub Memory
2>Quick Block Mem Test
0>Quick Block Mem Test
2>Quick Test 16777216 bytes at 00000020.00000000
0>Quick Test 16777216 bytes at 00000000.00600000
0>40% Done...
2>Flush Caches
0>Flush Caches
0>IO-Bridge unit 0 init test
0>IO-Bridge unit 1 init test
0>ERROR: TEST = IO-Bridge unit 1 init test
0>H/W under test = Motherboard/Centerplane IO-Bridge 1, CPU, I/O Board
0>MSG = ERROR: IO-Bridge Fault Check 0.
0>END_ERROR
0>ERROR: TEST = IO-Bridge unit 1 init test
0>H/W under test = Motherboard/Centerplane IO-Bridge 1, CPU, I/O Board
0>MSG = IO-Bridge Error - PCI A AFSR Reg,
address 00000400.04f02010
observed 80000030.40000000
0>END_ERROR
0>ERROR: TEST = IO-Bridge unit 1 init test
0>H/W under test = Motherboard/Centerplane IO-Bridge 1, CPU, I/O Board
0>MSG = IO-Bridge Error - PCI A AFAR Reg,
address 00000400.04f02018
observed 00000000.00000800
0>END_ERROR
0>ERROR: TEST = IO-Bridge unit 1 init test
0>H/W under test = Motherboard/Centerplane IO-Bridge 1, CPU, I/O Board
0>MSG = ERROR: IO-Bridge Fault Check 0.
0>END_ERROR
0>ERROR: TEST = IO-Bridge unit 1 init test
0>H/W under test = Motherboard/Centerplane IO-Bridge 1, CPU, I/O Board
0>MSG = IO-Bridge Error - PCI B CNTL Reg,
address 000007ff.ea000006
observed 2280
0>END_ERROR
0> FAILED
0>ERROR: TEST = IO-Bridge unit 1 init test
0>H/W under test = Motherboard/Centerplane IO-Bridge 1, CPU, I/O Board
0>MSG =
*** Test Failed!! ***
0>END_ERROR
0>IO-Bridge unit 0 reg test
0>IO-Bridge unit 0 mem test
0>IO-Bridge unit 0 PCI DMA A test
0>IO-Bridge unit 0 PCI DMA B test
0>IO-Bridge unit 0 PCI merg test
0>IO-Bridge unit 0 PCI iommu test
0>IO-Bridge unit 0 PCI stc test
0>IO-Bridge unit 0 interrupt test
2>IO-Bridge unit 0 init test
2>IO-Bridge unit 0 PCI merg test
2>IO-Bridge unit 0 interrupt test
0>
0>Motherboard/Centerplane Board Part Number:
0> 5016771-02-52
0>IO/Riser Board Part Number:
0> 5015142-15-50
0>CPUA Board Part Number:
0> 5016334-02-51
0>CPUB Board Part Number:
0>INFO: Unpopulated Slot
0>CPUC Board Part Number:
0>INFO: Unpopulated Slot
0>CPUD Board Part Number:
0>INFO: Unpopulated Slot
0>Turn IO-Bridge 0 errors on
0>Turn Cheetah 0 errors on
0>Turn Cheetah 2 errors on
0>Turn Module A DCDS errors on
0>Turn DCS errors on
0>Turn DAR errors on
0>Turn error traps on
0>ERROR:
0> POST toplevel status has the following failures:
0> IO-Bridge1
0> POST failed the following motherboard devices:
0> IO-Bridge1
0>END_ERROR
0>POST: Return to OBP.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:33 EDT