From: Daryl.Mitchell@us.o-i.com
Date: Fri Mar 18 2005 - 15:59:26 EST
Thanks for the many replies. All were thought provoking but ones that
helped most were from:
Darryl Marsee
Tom Payerle
Darren Dunham
Silly me, I didn't notice the global FcPortCfgEnable directive in jnic.conf
was set to false, therefore it wouldn't change the HBA config to fabric.
Many thanks.
DM
Daryl A
Mitchell/User/O-I
To
03/15/2005 04:23 sunmanagers@sunmanagers.org
PM cc
Subject
Fibre channel HBA errs
Environment is:
Solaris 2.6 on E10K with 2 JNIC HBAs (same model).
driver: AMCC Fibre Channel SCSI HBA Driver v4.1.6
prtdiag of cards:
6 SBus 25 1 fce/sd (block) FCE-1063
6 SBus 25 1 fce/sd (block) FCE-1063
Errors are:
Mar 15 14:53:27 oie10104 unix: jnic1: Link Up
Mar 15 14:53:37 oie10104 unix: jnic1: FLOGI timeout. Reseting...
Mar 15 14:53:37 oie10104 unix: jnic1: Link Down
Mar 15 14:53:38 oie10104 unix: jnic1: Driver and HBA topology mismatch.
Entering non-participating mode.
Mar 15 14:53:39 oie10104 unix: jnic1: Link Up
Mar 15 14:53:49 oie10104 unix: jnic1: FLOGI timeout. Reseting...
Mar 15 14:53:49 oie10104 unix: jnic1: Link Down
Mar 15 14:53:50 oie10104 unix: jnic1: Driver and HBA topology mismatch.
Entering non-participating mode.
Any idea what's going on? Same cards, using the same driver, into the
same type of switches....WTF?
Thanks in advance for any ideas.
DM
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:23 EDT