From: Brian Lucas (BLucas@accela.com)
Date: Wed Feb 23 2005 - 11:39:35 EST
Gurus,
Is there anyway to know on a remote server which network interface has a
cable plugged into it if that interface has never been configured
before? I have a remote server (never seen before) that a user says he
has plugged a network cable into and would like configured. Under /dev,
I see hme, ge, and qfe. ge0 is currently configured and everything else
isn't. Anyway to sense the network cable?
Much respect,
Brian
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:13 EDT