From: Rongsheng Fang (rfang@coke.umuc.edu)
Date: Wed Feb 02 2005 - 16:00:36 EST
Hi list,
We have a A1000 connected to a E10K domain. We sucessfully jumpstarted
the domain with Solaris 8 2/04. But when the system reboots, some kind
of "Parity Error" gets spit out. Here is the boot message:
========================================================================
Boot device: /sbus@60,0/QLGC,isp@0,10000/sd@5,0:a File and args: -v
Size: 364952+95413+104807 Bytes
SunOS Release 5.8 Version Generic_117350-13 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Ethernet address = 0:0:be:a6:b6:e2
mem = 8388608K (0x200000000)
avail mem = 8207843328
root nexus = SUNW,Ultra-Enterprise-10000
sbus0 at root: UPA 0x60 0x0 ...
sbus0 is /sbus@60,0
sbus1 at root: UPA 0x68 0x0 ...
sbus1 is /sbus@68,0
isp0 at sbus0: SBus0 slot 0x0 offset 0x10000 SBus level 3 sparc9 ipl 5
isp0 is /sbus@60,0/QLGC,isp@0,10000
/sbus@60,0/QLGC,isp@0,10000 (isp0):
Firmware Version: v1.37.5, Customer: 15, Product: 0
sd5 at isp0: target 5 lun 0
sd5 is /sbus@60,0/QLGC,isp@0,10000/sd@5,0
WARNING: /sbus@60,0/QLGC,isp@0,10000 (isp0):
Target 5 reducing transfer rate
WARNING: /sbus@60,0/QLGC,isp@0,10000 (isp0):
Parity Error
WARNING: /sbus@60,0/QLGC,isp@0,10000 (isp0):
Target 5 disabled wide SCSI mode
WARNING: /sbus@60,0/QLGC,isp@0,10000 (isp0):
Parity Error
WARNING: /sbus@60,0/QLGC,isp@0,10000 (isp0):
Parity Error
Vendor 'Symbios', product 'StorEDGE', 35295232 512 byte blocks
WARNING: /sbus@60,0/QLGC,isp@0,10000 (isp0):
Parity Error
WARNING: /sbus@60,0/QLGC,isp@0,10000 (isp0):
Parity Error
WARNING: /sbus@60,0/QLGC,isp@0,10000 (isp0):
Parity Error
WARNING: /sbus@60,0/QLGC,isp@0,10000 (isp0):
Parity Error
WARNING: /sbus@60,0/QLGC,isp@0,10000 (isp0):
Parity Error
Vendor 'Symbios', product 'StorEDGE', 35295232 512 byte blocks
WARNING: /sbus@60,0/QLGC,isp@0,10000 (isp0):
Parity Error
WARNING: /sbus@60,0/QLGC,isp@0,10000 (isp0):
Parity Error
WARNING: /sbus@60,0/QLGC,isp@0,10000 (isp0):
Parity Error
Vendor 'Symbios', product 'StorEDGE', 35295232 512 byte blocks
Cannot mount root on /sbus@60,0/QLGC,isp@0,10000/sd@5,0:a fstype ufs
panic[cpu32]/thread=10408000: vfs_mountroot: cannot mount root
0000000010407970 genunix:vfs_mountroot+70 (1043e400, 0, 0, 10477aa2, 80,
14)
%l0-3: 000000001043e400 0000000010441ce0 00000014ffc00000
%000000001043e7b8
%l4-7: 0000000000000000 0000000010414a18 00000000000c418e
%000000000000018e
0000000010407a20 genunix:main+8c (10411228, 2000, 10407ec0, 10408030,
fff2, 100550dc)
%l0-3: 0000000000000001 0000000000000001 0000000000000015
%0000000000000f82
%l4-7: 00000000104313b8 000000001047cfe0 00000000000e0590
%0000000000000540
skipping system dump - no dump device configured
rebooting...
Resetting...
========================================================================
It looked like some kind of hardware problem to us, so we relaced
cable, terminator and even the E10K boards but still no luck. Even
odder, if we boot the system into single user mode from net (boot net
-s), then we can mount the A1000 LUN and write to it without any
problems. We even saw the OS that had been installed on that LUN.
BTW, probe-scsi-all did see the A1000 LUNs without any errors popping
out.
Any ideas/thoughts will be greatly appreciated!
Thanks,
Rongsheng Fang
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:06 EDT