From: Kay-Markus.Thiel@dw-world.de
Date: Wed Feb 02 2005 - 11:30:54 EST
Hi all,
we are testing a solaris machine connected to a HP EVA5000. We decided to
use HP HBAs and because of this we have to use HP securepath software. Up
to the point we are adding the second SAN switch everything is working fine
(virtual disks, slices, filesystems). After enabling the second switch the
solaris os (version 8, i know version 10 is on the market these days ;-)) )
is about to see every disk twice. To our surprise: after the next
reconfiguration reboot solaris seems to see every disk 4 times by adding
"new" controllers.
My question is: are there any solaris software packages like SAN foundation
kit nessesary to add the desired functionality or should the securepath
software do this job and maybe we are missing a few configuration steps.
thanks in advance. I will summarize!!!
with kind regards
Kay Markus Thiel
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:06 EDT