From: suresh.somanathan@wipro.com
Date: Tue Feb 01 2005 - 07:01:16 EST
Hi all,
System H/w Configuration : Sparc 10, Sol 8 with Generic_117000-03 / Dual HBAs
/ Quad Ethernet Card (Same configuration of 2 Systems)
S/w information : Veritas Cluster Software Quick start 2.0 / Vxvm 3.1.1/ Vxfs
3.4.
*) Installed Solaris, and updated the patch level,
*) Installed Vxvm / Vxfs & updated relevant patches
*) Configured the DG by (vxdg init ) - I have not mentioned -s option while
creating, since the DG has host id of the system where I have created the DG.
*) I have installed the vcsqs, and configured the application group with Dg.
Now the requirement starts, I have to create NFS resource group on cluster.
How ever I run the vcsqs-nfs-wizard it is not showing the share, If I select
the volume, it prompts the DG is not shared.
Since I have used vxdg deport <dgname> and try to import as vxdg -s import
<dgname> (as suggested in the doc of vcsqs)
But it throws me an error,
#vxdg -s import sharedg
vxvm:vxdg: ERROR: Disk group sharedg: import failed: Error in cluster
processing
#
I need to get this done as early as possible, please help me out to sort out
the issue.
Thanks in advance,
Suresh
Confidentiality Notice
The information contained in this electronic message and any attachments to
this message are intended
for the exclusive use of the addressee(s) and may contain confidential or
privileged information. If
you are not the intended recipient, please notify the sender at Wipro or
Mailadmin@wipro.com immediately
and destroy all copies of this message and any attachments.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:05 EDT