From: rob.de.langhe@belgacom.be
Date: Mon Jan 24 2005 - 07:56:37 EST
Hi,
we have a E15K domain running Solaris-8, and connected to a SAN via
QLogic-2300 Host Bus Adapters.
A bunch of EMC-Symmetrix disks are already made available to the server
and being used for filesystems through VxVM.
Now we need to add an extra LUN coming from an EMC-Clariion CX600 array.
The new LUN is discovered with SCSI-probing, but showing up in "format"
as a "drive type unknown" ...
When I try to let "format" "auto-configure" the disk type (option
"type", then select "0. Auto-Configure") I get the message
Auto configure failed
Within "format", the "inquiry" option yields
Vendor: DGC
Product: CX700
Revision: HP03
In VxVM, I have added the JBOD id with
vxddladm addjbod vid=DGC pagecode=0x83 offset=8 length=16
The people here told me that in previous attempts to make new
Clariion-LUNs correctly identified by Solaris on a machine that has
already Symmetrix-LUNs, was only after a reboot ... Which is surely not
the procedure I want to adopt (production servers, hey)
Any suggestions what can be done about it ?
TIA
Rob
**** DISCLAIMER ****
http://www.belgacom.be/maildisclaimer
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:03 EDT