From: simonb (simonb@zapik.co.uk)
Date: Fri Jan 07 2005 - 08:05:54 EST
I have been asked to build a second E280R from the ufsdump tapes from
the first. One internal disk 76Gb the original was 36GB. I cannot gert
it to boot properly. See below
1. boot cdrom -s
2. format disk with partitions /dev/dsk/c1t0d0s0(root), S1(swap).
3. swap -a /dev/dsk/c1t0d0s1
4. ufsrestore -rf /dev/rmt/0 This puts all the /usr /var etc in the one
partition. No disk mirror or anything. No other partition used for /usr
etc.
5. I tried to boot from the boot disk it gets as far as trying to
recognise /dev/dsk/c1t0d0s0 and swap and says the partition does not
exist.
I tried boot -r to reconfigure the /dev /devices dir but to no avail.
The question is, what have I forgotten to do?
-- simonb <simonb@zapik.co.uk> UMAX-IT Limited _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:57 EDT