From: Geon Reuben (geomonap@rediffmail.com)
Date: Wed Jan 05 2005 - 14:50:44 EST
Resending with proper subject...
Hi guys, this is a time critical issue and
hence am posting on this board.
I have set up a serial connection from my
laptop( usb to serial ) to a Sun 280R. Everything appears to be fine when I
cold boot the system ( I get the usual output and hte ok prompt ) however,
whatever I type ('boot cdrom' or 'boot net' etc.) is not displayed on the
screen. The baud rate set is set to 9600, the data bit is set to 8, parity is
set to none and stop bits is set to 1The output from the sun server after the
cold boot is below:
----------------------
~
screen not found.
keyboard not
found.
Keyboard not present. Using ttya for input and output.
Sun Fire 280R
(2 X UltraSPARC-III+) , No Keyboard
Copyright 1998-2003 Sun Microsystems, Inc.
All rights reserved.
OpenBoot 4.10.11, 1024 MB memory installed, Serial
#51905316.
Ethernet address 0:3:ba:18:3:24, Host ID: 83180324.
Boot device:
/pci@8,600000/SUNW,qlc@4/fp@0,0/disk@w21000004cf9f33e1,0:a File and args:
Boot load failed.
The file just loaded does not appear to be executable.
{0}
ok
---------------------------------
Thanks in advance,
GR
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:57 EDT