From: rob.de.langhe@belgacom.be
Date: Wed Dec 29 2004 - 07:13:30 EST
Hi,
our machines have not rebooted since long time, so I cannot find the
startup-messages with firmware version from the QLogic-HBAs in the
/var/adm/messages* nor the "dmesg" output.
What command should I use to read out their current firmware version ?
TIA
Rob
**** DISCLAIMER ****
"This e-mail and any attachments thereto may contain information
which is confidential and/or protected by intellectual property
rights and are intended for the sole use of the recipient(s)named above.
Any use of the information contained herein (including, but not limited to,
total or partial reproduction, communication or distribution in any form)
by persons other than the designated recipient(s) is prohibited.
If you have received this e-mail in error, please notify the sender either
by telephone or by e-mail and delete the material from any computer.
Thank you for your cooperation."
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:55 EDT