From: Rajeev Andrews (mailtorajiv@yahoo.com)
Date: Thu Dec 23 2004 - 03:08:09 EST
Greetings All,
We have one E 450 server with two CPU and one Board,2
GB of Memory.The problem is that it went off suddenly
and not coming up.Even it's not passing the POST and
OpenBoot diganostics.We have made a hard reboot of the
machine and sometimes it gave some messages on the
HyperTerminal sometime not.But after some time it
stops.
Only I am getting a Green LED on Power On Icon and no
blinkg Green LED on Activity Icon or any LED on
General Fault Icon.
I am attaching the output which i got in Hperterminal.
Offline: CPU0 (MD'ed)
Online: CPU1 Ultra-II (v2.0) 3:1 2048KB 2-2 ECache
MCap 13
Offline: CPU2 (MD'ed)
Online: CPU3 Ultra-II (v2.0) 3:1 0KB 2-2 ECache MCap
13
Probing keyboard for L1/L1-D...
Executing Power On SelfTest w/%o0 =
0000.0000.0010.1002
1>
1>@(#) Sun UltraSPARC-II 4-way UPA/PCI POST 6.0.9
02/12/99: 07:52
1>INFO: Processor 1 is master CPU.
1>INFO: Motherboard rev FCS
1>
1> <00> Init System BSS
1> <00> NVRAM Battery Detect Test
1> <00> NVRAM Scratch Addr Test
1> <00> DMMU TLB Tag Access Test
1> <00> DMMU TLB RAM Access Test
1> <00> Probe Ecache
1>INFO: 2048KB Ecache
1> <00> Ecache RAM Addr Test
1> <00> Ecache Tag Addr Test
1> <00> Invalidate Ecache Tags
1> <00> SC Dtag Probe
1>INFO: Dtag supports up to 8MB Ecache
1>INFO: Processor 0 is missing or disabled.
1>INFO: Processor 2 is missing or disabled.
1>INFO: Processor 3 - UltraSPARC-II.
1> <00> Init SC Regs
1> <00> SC Address Reg Test
1> <00> SC Reg Index Test
1> <00> SC Regs Test
1> <00> SC Dtag RAM Addr Test
1> <00> SC Dtag Init
1> <00> Init SC Regs
1> <00> SC Cache Size Init
3> <00> Probe Ecache
3>INFO: 2048KB Ecache
3> <00> Ecache RAM Addr Test
3>STATUS=FAILED
3>TEST =Ecache RAM Addr
SUSPECT =CPU Module, ECache Data
3>MSG =RAM compare error
index 00000000
exp ffffffff.ffffffff
obs 00000000.00000000
xor ffffffff.ffffffff
1> <00> Synch up Processor Ecache Sizes
1> <00> Probe Memory
1>INFO: 1024MB Bank 0
1>INFO: 1024MB Bank 1
1>INFO: No memory detected in Bank 2
1>INFO: No memory detected in Bank 3
1> <00> Test Memory Data Lines
1> <00> Test Memory Address Lines
1> <00> Malloc Post Memory
1> <00> Init Post Memory
1> <00> Map PROM/STACK/NVRAM in DMMU
1> <00> Memory Stack Test
1> <00> Init Memory
1> <00> ECC Memory Addr Test
1> <00> V9 Instruction Test
1> <00> Memory Addr w/ Ecache Test
1> <00> Block Memory Addr Test
1> <00> Copy Post to Memory
1> <00> Map/Exec POST from Memory
1> <00> Map alternate CPUs
SC Control: 0000.0000.0200.0000
SC CP0 CFG: 0000.0000.8100.4000 STS:
0000.0000.01e0.0000
SC CP1 CFG: 0000.0000.0100.4000 STS:
0000.0000.41e0.0000
SC CP2 CFG: 0000.0000.8100.4000 STS:
0000.0000.01e0.0000
SC CP3 CFG: 0000.0000.0100.4000 STS:
0000.0000.41e0.0000
SC P1F CFG: 0000.0000.0110.4000 STS:
0000.0000.0100.0000
SC P06 CFG: 0000.0000.0110.4000 STS:
0000.0000.0100.0000
SC P04 CFG: 0000.0000.0110.4000 STS:
0000.0000.0100.0000
SC SIFault: 0000.0000.0000.0006
CPU AFSR: 0000.0001.8800.0000 AFAR:
0000.01ff.f150.0000
CPU UDBH: 0000.0000.0000.0000 UDBL:
7fff.f3b4.0100.0000
P@1F Ctrl: 04f8.0000.0000.0000
UE AFSR: 0000.4008.8400.0000 AFAR:
0000.0082.8001.0011
CE AFSR: 004c.0020.9400.0000 AFAR:
0000.0030.4029.c012
P@06 Ctrl: 04f8.0000.0000.0000
UE AFSR: 0000.0985.8000.0000 AFAR:
0000.0000.7070.4000
CE AFSR: 0005.0414.5080.0000 AFAR:
0000.01ac.0400.8408
P@04 Ctrl: 04f8.0000.0000.0000
UE AFSR: 0000.ffc9.7f00.0000 AFAR:
0000.00db.7beb.ef14
CE AFSR: 0073.3011.e180.0000 AFAR:
0000.0128.3cc8.2da2
Is this is the problem of any Hardware
Failure(memory,board etc )
Please advice on this.
Thanks & Regards
Rajeev Andrews
__________________________________
Do you Yahoo!?
Send a seasonal email greeting and help others. Do good.
http://celebrity.mail.yahoo.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:55 EDT