From: Steve Rieger (steve.rieger@tbwachiat.com)
Date: Tue Dec 07 2004 - 10:20:02 EST
The two micro switches in the back were working fine., the little points on
the side panels were not contacting them though. So I just pushed those two
points pout a bit and made sure that they are contacting properly. All is
good now Thanx to you guys
On 12/6/04 11:06 AM, "Steve Rieger" <steve.rieger@tbwachiat.com> wrote:
> Hi all,
>
> I recently (a week ago) to delivery of an e450, my intentions were to learn
> a bit more of the Solaris env that I have not had a chance to dig into as of
> yet.
>
> I installed the os and patched it . Then I opened the covers and added
> another disk board. And now the box will not power up. I get two good led's
> on the power supply and also internally I get one led when the power is
> plugged in. the two micro switched that only get activated when the side
> panels are closed are ok, and as a backup I taped them in the closed
> position just to see if the system would boot up. But no.
>
>
> Any ideas as to where to look next.
> --
> Steve Rieger
> Direct 212-804-1131
> Cell 646-335-8915
> _______________________________________________
> sunmanagers mailing list
> sunmanagers@sunmanagers.org
> http://www.sunmanagers.org/mailman/listinfo/sunmanagers
>
-- Steve Rieger Direct 212-804-1131 Cell 646-335-8915 _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:50 EDT