From: mark@proser.co.uk
Date: Tue Nov 23 2004 - 14:28:15 EST
Can anybody help with this :
Seagate Viper 200 LTO1 drive connected to a X5678A (scsi3 LVD card) on a
V880.
Can see the drive when we run a probe-scsi-all, but Solaris will not pick it
up. We have edited the st.conf file with :
tape-config-list=
"SEAGATE ULTRIUM06242-XXX","Seagate LTO","SEAGATE_LTO";
SEAGATE_LTO = 1,0x36,0,0x1d639,4,0x00,0x00,0x00,0x00,1;
but still no joy.
Can anybody point us in the right direction.
Cheers
Mark
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:46 EDT