From: Murray Robert-rmurra01 (robertmurray@motorola.com)
Date: Thu Oct 07 2004 - 18:34:25 EDT
Hi
A big thanks to all for the fast response
My new VXFS filesytems were created with no largefile support ?
The fix is ..
# fsadm -F vxfs /dir_name
should tell you. If it isn't enabled, you can enable it with
# fsadm -F vxfs -o largefiles /dir_name
credit is due to
Darren Dunham
Mahesh Gurugunti
David Foster
Sherman Butler
Frank Smith
If you're ever in Dublin, I'll buy you a Guiness
Best Rgds
Rob
-----Original Message-----
From: sunmanagers-bounces@sunmanagers.org
[mailto:sunmanagers-bounces@sunmanagers.org]On Behalf Of Murray
Robert-rmurra01
Sent: 07 October 2004 22:52
To: sunmanagers@sunmanagers.org
Cc: Jamil Amir-ajamil01
Subject: File too large problem
Hi
I'm trying to move data to a new LSI storage system.
each time I try to cp or rdist the 3.4GB file I get "File too large" errors.
The copy seems to run until 2.1 GB then it fails.
I've checked the ulimit -a output,
which is set to unlimited
glas226>> ulimit -a
time(seconds) unlimited
file(blocks) unlimited
data(kbytes) unlimited
stack(kbytes) 8192
coredump(blocks) unlimited
nofiles(descriptors) 100
vmemory(kbytes) unlimited
glas226>>
I have tried to run this in a bourne and C-Shell
with no limits set on either.
I have run the comand from a Solaris 8 amd Solaris 9 Client.
I also avoided automounter , and manually mounted the filesystem just in case.
Also the remote filesystem (target) is a vxfs filesystem.
Any ideas would be greatly appreciated.
Best Rgds
Rob
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:33 EDT