From: Steve Roberts (steverobertsjobsearch@hotmail.com)
Date: Fri Sep 24 2004 - 05:01:36 EDT
Thanks this has sorted it.
Steve.
>From: Stephane Tsacas <stephane.tsacas@gmail.com>
>Reply-To: Stephane Tsacas <stephane.tsacas@gmail.com>
>To: Steve Roberts <steverobertsjobsearch@hotmail.com>
>Subject: Re: Sunfire v20 network card issues
>Date: Thu, 23 Sep 2004 15:22:53 +0200
>
>http://www.cisco.com/warp/public/473/12.html
>eg. disable SPT checks (portfast mode) or completly disable SPT on the
>servers VLAN.
>Hope this helps.
>Stephane
>
>
>
>On Thu, 23 Sep 2004 10:07:27 +0000, Steve Roberts
><steverobertsjobsearch@hotmail.com> wrote:
> > We have one of these now installed with Linux as our test bed. It is
>plugged
> > into a Cisco gigabit switch. When the server is rebooted the port light
>on
> > the switch goes from green to amber and then back to green as the server
> > boots up. Once however the bootup process initiaites the ethernet port
>it
> > goes back to amber again, the bootup continues but then the nfs software
> > can't mount some of the remote file systems because the switch is still
> > showing amber ( it goes green after 30 secs or so )??
> >
> > _________________________________________________________________
> > It's fast, it's easy and it's free. Get MSN Messenger today!
> > http://www.msn.co.uk/messenger
> > _______________________________________________
> > sunmanagers mailing list
> > sunmanagers@sunmanagers.org
> > http://www.sunmanagers.org/mailman/listinfo/sunmanagers
> >
_________________________________________________________________
It's fast, it's easy and it's free. Get MSN Messenger today!
http://www.msn.co.uk/messenger
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:29 EDT