From: Dell, Mary (mdell@mesirowfinancial.com)
Date: Tue Sep 21 2004 - 16:37:34 EDT
Hi all,
I have an E220r. I had a pci-ce card in it (that would be the sun gigaswift
ethernet card). I pulled that card out, replaced it in the same slot with a
pci-ge card (that would be the older, sun gigabit ethernet card, that uses
the ge driver). Did a reconfiguration boot (using touch /reconfigure and
init 6, not from the ok prompt), devfsadm, all that good stuff. Uninstalled
the ce driver. and installed the ge driver. Still can't plumb ge0 - get "no
such interface" - and when I do prtdiag it shows that I have the pci-ce
card.
How can I force the machine to take another look at its hardware, and
correctly identify it? Should I be doing my reconfig boot from the prom?
Thanks!
Mary
This communication may contain privileged and/or confidential
information. It is intended solely for the use of the addressee. If you are
not the intended recipient, you are strictly prohibited from disclosing,
copying, distributing or using any of this information. If you received this
communication in error, please contact the sender immediately and destroy
the material in its entirety, whether electronic or hard copy. Confidential,
proprietary or time-sensitive communications should not be transmitted via
the Internet, as there can be no assurance of actual or timely delivery,
receipt and/or confidentiality. This is not an offer, or solicitation of any
offer to buy or sell any security, investment or other product.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:29 EDT