From: Smith, Kevin (kevin.m.smith@siemens.com)
Date: Mon Jul 12 2004 - 08:52:24 EDT
All,
I am trying to add a static route to a F12K system controller using the
following command:
route -f add DESTINATION-NETWORK GATEWAY -netmask 255.255.255.224
The DESTINATION-NETWORK and GATEWAY IP addresses are valid for the route
[have checked on another host].
Problem: Whenever this route is added, the system controller looses all
external network connectivity and fails over to the second SC. The route is
shown in the routeing table [netstat -r] - Once the static route is removed,
the HME interface on the SC comes backup and network connectivity is
restored.
Has anyone got any ideas why this is happening?
---------------------------------------------------
Kev Smith
Unix Systems Administrator.
Operational Support, IND Croydon.
E-Mail: kevin.m.smith AT siemens.com
Tel: 020 8760 3358
Mob: 07808 828595
---------------------------------------------------
This e-mail contains confidential information and is for the
exclusive use of the addressee/s. If you are not the addressee, then any
distribution, copying or use of this e-mail is prohibited. If received in
error, please advise the sender and delete it immediately. We accept no
liability for any loss or damage suffered by any person arising from use of
this e-mail.
Siemens Business Services Limited
Registered No: 1203466 England
Registered Office: Siemens House, Olbury, Bracknell, Berkshire, RG12 8FZ
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:04 EDT