From: Anjan Dave (adave@vantage.com)
Date: Tue Jun 22 2004 - 17:08:39 EDT
Dear All,
Hope someone can shed some light on this. I have a T3 that I need to get
in via the 10Mbps Ethernet port. I've put the Ethernet address in
/etc/ethers, and the host/IP in /etc/hosts, and the in.rarpd is also
running, but the T3 doesn't assign itself the IP, hence, it's not
accessible.
There's another T3 on the same network, same switch, which is accessible
(telnet IP).
I've tried cold-booting the T3, rebooted the host, swapped the Ethernet
cable with no change.
I can see the drives in format on the host, and the previously
configured volume on it, and can mount it...
Not sure what else to check. Appreciate any inputs, please.
Thanks,
Anjan
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:55 EDT