Qlogic2100/FC100 (X6729A) seen on OK, but not on OS.

From: NetComrade (netcomrade@bookexchange.net)
Date: Wed Jun 09 2004 - 11:15:17 EDT

• Next message: Fletch: "Site changes"
• Previous message: Tis Unix: "UPDATE: shh - passwordless logins ......"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Gurus,

I have finally gotten a sun card so that luxadm would work w/ my A5200.

However, the card is seen via OK (together w/ disks), just like FC-100
manual states they should, but the card is not seen at OS level.

SUNWifp and SUNWifph are installed. System has latest patches. I did
boot -r. It's interesting that OBP didn't see the card until I did a
reset-all .

Here's output of prtdiag -v

========================= IO Cards =========================
     Bus Freq
Brd Type MHz Slot Name Model
--- ---- ---- ---- --------------------------------
SYS PCI 33 2 pciclass,001000 Symbios,53C875
SYS PCI 33 3 pciclass,001000 Symbios,53C875
SYS PCI 33 4 pciclass,068000
SYS PCI 33 4 pci108e,1001 SUNW,cheerio
SYS PCI 33 4 pciclass,010000 QLGC,ISP1040B
SYS PCI 33 6 TSI,gfxp GFXP
SYS PCI 33 7 pciclass,0000

Any suggestions?

Thanks.

P.S.
I didn't not install SUNWvts, since I didn't find it on Sol2.7 CD, and it
didn't seem necessary.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Fletch: "Site changes"
• Previous message: Tis Unix: "UPDATE: shh - passwordless logins ......"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:49 EDT