From: Moshe Leder (leder@mercury.co.il)
Date: Sun Jun 02 2002 - 13:51:12 EDT
Hi & thanks for all that replied, your replies wore very helpful!
Eventually the solutions was the command "reset -x". Once in the lom> prompt
(after pressing #. [hash period]) entering this command caused the server to
stop the boot cycle in the OBP (ok prompt) and from there the way to "boot
-s" was clear.
Thanks again,
Moshe Leder.
-----Original Message-----
From: Moshe Leder [mailto:leder@mercury.co.il <mailto:leder@mercury.co.il> ]
Sent: Wednesday, May 29, 2002 4:26 PM
To: sunmanagers@sunmanagers.org
Subject: LOM boot options
Hi managers,
I have a problem in one of my Netra servers, It's NIS configuration got
corrupted & now it doesn't boot.
The thing is, because it does not have any keyboard/screen attached & the
only mean of connection to it is through Window's HyperTerminal, I can't
send break signals to it (Ctrl+Break doesn't work) & hence boot to single
user mode.
My question is: Is there a LOM command that tells the machine to boot into
OK mode (from there the way to 'boot -s' is obvious). The default 'reset'
command behavior is similar to OK mode's 'boot' command.
Thanks in advance,
Moshe Leder.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
<http://www.sunmanagers.org/mailman/listinfo/sunmanagers>
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:24 EDT