From: Kris Briscoe (krisb@tti-telecom.com)
Date: Fri May 14 2004 - 15:57:49 EDT
Everyone,
I have an E6500 that I recently added a fourth A1000 to. I did
a drvconfig and all that good stuff. For whatever reasons the raid manager
software did not automatically detect the added array. Does anyone know the
command to tell the raid manager to detect and use the new array?
Kris-
Kristopher Briscoe
UNIX Systems Engineer
CQM / ClearCase
TTI Telecom
Atlanta, Ga
Mobile 404.353.3223
Office 770.206.4749
<mailto:krisb@tti-telecom.com> krisb@tti-telecom.com
<http://www.tti-telecom.com/> www.tti-telecom.com
Information in this e-mail and its attachments is confidential and may be
privileged. This e-mail is for the exclusive use of the intended
recipient(s). If you are not one of the intended recipients, you are hereby
informed that any use, disclosure, distribution, and/or copying of this
information is strictly prohibited. If you have received this information in
error, please inform the sender and then delete it from your system
immediately. Thank you.
[demime 1.01b removed an attachment of type application/octet-stream which had a name of Kris Briscoe.vcf]
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:39 EDT