From: Harald Husemann (harald.husemann@materna.de)
Date: Tue May 11 2004 - 10:49:24 EDT
<Original posting below>
Hi again,
thanks to:
Mike (mikelist@sky.net),
Terry L Moore <tmoore@redwood.rsc.raytheon.com>,
Williams Shawn <SWilliams@nexstar.com>,
John Rushe (AXA-TECH-UK) <John.Rushe@axa-tech.com>,
Pablo Jejcic - Smartweb <pablo.jejcic@smartweb.rgu.ac.uk> and
Pascal Grostabussiat
<pascal@azoria.com>
for their quick responses,and special thanks to Michael Schulte for
calling me on my mobile and pointing me in the right direction, :-)
Some of you suspected a HW-failure, maybe a defective CPU - but,
fortunately, that was not the reason, :-)
The system was part of a cluster, and for this, it was equipped with a
qfe- and an SCSI-card. Well, it seems those cards leave some "traps" in
the OBP, even when you plug them out...
So, I did a "set-defaults" at the OBP prompt to reset the nvram to
factory defaults (thanks to John Rushe for the tip!), and voila, the
system boots! Now, the installation is working, :-))
Thanks to the list for the quick help,
Harald
On Tue, 2004-05-11 at 15:34, Harald Husemann wrote:
> Hi gurus,
>
> I've got a problem with an E420 here. The machine has been used as part
> of a SUN Cluster, which I has been disassembled.
> Now, I'd like to install the machine from CD-ROM (using Sol 9 12/03), to
> get a clean system...
>
> But, the following happens every time I try to boot it:
>
> ==================/snip/====================================
> {1} ok boot cdrom
> Boot device: /pci@1f,4000/scsi@3/disk@6,0:f File and args:
> Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
> FCode UFS Reader 1.11 97/07/10 16:19:15.
> Redirected to slice: 1
> Loading: /platform/SUNW,Ultra-80/ufsboot
> Loading: /platform/sun4u/ufsboot
> SunOS Release 5.8 Version Generic_108528-20 64-bit
> Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
> WARNING: [AFT1] Timeout on System Bus in privileged mode from CPU1 Data
> access at TL=0, errID 0x0000005d.fdd146db
> AFSR 0x00000000.88000000<PRIV,TO> AFAR 0x000001ff.80010010
> AFSR.PSYND 0x0000(Score 05) AFSR.ETS 0x00 Fault_PC 0x1022bd28
> UDBH 0x0000 UDBH.ESYND 0x00 UDBL 0x0000 UDBL.ESYND 0x00
>
> panic[cpu1]/thread=10408000: [AFT1] errID 0x0000005d.fdd146db BTO
> Error(s)
> See previous message(s) for details
>
> ===========/snap/=====================================
>
> I've also tried to boot from disk in non-cluster mode, same result.
> Diag-switch is true, diag-level is max, but I don't see any error
> messages during POST.
> Is this a hardware problem?? Should I call SUN support??
> Also searched sunsolve and docs.sun.com, no result.
>
> Hope anyone can help, thanks in advance!
>
> Harald
-- ============================================ Harald Husemann Systems Engineer Teammanager Unix administration and Configuration Management Materna Gmbh - Vo_kuhle 37 - D-44141 Dortmund, Germany Phone: +49-231-5599-8684 _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:38 EDT