From: Richard Young (rjyoung@nortelnetworks.com)
Date: Mon May 10 2004 - 12:44:27 EDT
Hi all,
Thanks to Mike and Tony Walsh for replying.
I found the answer finally!
I needed to set up the modem with the following commands:
AT&F0, AT\T7, AT&R2, AT&C1, ATE0 AT%K1, ATQ1, AT&W0 and AT&Y
and you need to build the DB25/RJ45 cable as per the sun documentation
817-1960-10 and then use a NULL modem converter on the DB25 pinout to
the modem before it will work.
Rich
Richard Young wrote:
> Thanks to Mike for pointing out that I should list the modem.
>
> I am using a Microcom DeskPorte 28.8P V.34 modem
>
> Rich
>
>
> Hi all,
>
> I have a Netra 240 and am trying to set up a modem connection to it.
>
> In the documentation it says to login to the ALOM and set the if_modem
> to true.
>
> Then it say to connect the modem to the port.
>
> I had an RJ-45 to DB-25 special connector made as per the
> documentation to do this.
>
> A have performed this, however, the DTR, CTS, and AA lights do not
> illuminate as they are suppose to.
>
> I have also attempted to connect to the modem via another dumb
> terminal and modem setup, however, the console port will not answer
> (I guess since it really never got set up).
>
> Thanks in advance for and advice.
>
> Richard Young
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:37 EDT