From: ert weerr (sun1sol@yahoo.com)
Date: Sun May 02 2004 - 22:45:23 EDT
Hi guruz,
I attached a new L25 tape library to a V240 w.
Solaris 8.
However I can see the unit after probe-scsi-all, I
can't find that under the operating system:
ok probe-scsi-all
/pci@1c,600000/scsi@2,1
/pci@1c,600000/scsi@2
Target 0
Unit 0 Disk FUJITSU MAP3367N SUN36G 0401
Target 1
Unit 0 Disk SEAGATE ST336607LSUN36G 0307
/pci@1e,600000/pci@3/scsi@5
/pci@1e,600000/pci@3/scsi@4
Target 0
Unit 0 Removable Medium changer ATL 1500
3.07
Target 1
Unit 0 Removable Tape QUANTUM SDLT320
2E2E
Target 2
Unit 0 Removable Tape QUANTUM SDLT320
2E2E
# ls -l /dev/rmt
#
# cfgadm
Ap_Id Type Receptacle
Occupant Condition
c0 scsi-bus connected
configured unknown
c1 scsi-bus connected
configured unknown
c2 scsi-bus connected
unconfigured unknown
I already issued the devfsadm;tapes, devfsadm -Cc
tapes, reboot -- -r, touch /reconfigure,
etc. commands, but nothing changed...
Could you help me please to configure that library
under Solaris?
Thanks in advance!
John
__________________________________
Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs
http://hotjobs.sweepstakes.yahoo.com/careermakeover
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:35 EDT