From: Marcelino Mata (mmata@multimatic.com)
Date: Tue Apr 20 2004 - 15:45:23 EDT
We just purchased an additional 4Gb RAM for our Blade1000 (Sun licensed 3rd
party). We have removed all existing RAM to keep things simple. While the
system starts to boot, it hangs shortly after the "Print service starting"
message.
Has anyone else run across this type of problem? I can not find any memory
related issues resolved in OpenBoot level upgrades but I am running version
4.5.4 while the latest is 4.13.0
Is there any useful diagnostics routines at the OpenBoot level?
Marcelino
System Information
# /usr/sbin/prtconf -V
OBP 4.5.4 2001/12/19 14:37
# eeprom
test-args: data not available.
diag-passes=1
enclosure-type=540-3256-15
banner-name=SUNW,Sun-Blade-1000
energystar-enabled?=true
pcia-probe-list=4,1
pcib-probe-list=5,6,1,2,3,4
local-mac-address?=false
fcode-debug?=false
silent-mode?=false
scsi-initiator-id=7
oem-logo: data not available.
oem-logo?=false
oem-banner: data not available.
oem-banner?=false
ansi-terminal?=true
screen-#columns=80
screen-#rows=34
ttyb-rts-dtr-off=false
ttyb-ignore-cd=true
ttya-rts-dtr-off=false
ttya-ignore-cd=true
ttyb-mode=9600,8,n,1,-
ttya-mode=9600,8,n,1,-
output-device=screen
input-device=keyboard
load-base=16384
auto-boot?=true
boot-command=boot
diag-file: data not available.
diag-device=net
boot-file: data not available.
boot-device=disk0:a
use-nvramrc?=true
nvramrc=devalias mydev /pci@8,700000/SUNW,XVR-500@1
devalias xvr500 /pci@8,700000/SUNW,XVR-500@1
security-mode=none
security-password: data not available.
security-#badlogins=0
#power-cycles=65
diag-script=none
diag-level=min
diag-switch?=false
error-reset-recovery=boot
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:29 EDT