From: VEGH Karoly (karoly.vegh@uta.at)
Date: Tue Apr 13 2004 - 09:56:43 EDT
Hi,
I'm having an issue with a netra t4, I cannot get to an 'ok' prompt
on it.
No VGA is in it, so I attached two serial-connections to it, one
to the LOM card, and one to the port 'A'.
the lom-port is full functional, but on port 'A' I can't get an 'ok'
prompt.
Both cables are OK, tested.
lom>show
escape #.
model Netra T4
hostname cl201
power-on-decline off
power-on-delay off
bootmode normal
rsc-security off
flow-control off
login-timeout off
event-reporting on
Time since last boot: +96d+20h17m43s
lom>
there is a 'console' command in the lom> commandline-prompt, but I don't know
the right syntax to use it.
how to set the default console-output to port 'A'?
on port 'A' I get no information at, all, though it worked, before I begun
to install the box (and stopped it to begin again) with 'boot net'.
I would need to start with 'boot net' again, but cannot start it without
an ok prompt.
any ideas?
any help is appreciated
tia
charlie
-- Vigh Karoly - System Engineer - UTA - TIS.SAS.BSS "There are two major products that come out of Berkeley: LSD and UNIX. We don't believe this to be a coincidence." - Jeremy S. Anderson _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:27 EDT