From: NetComrade (netcomrade@bookexchange.net)
Date: Fri Mar 26 2004 - 12:33:48 EST
Gurus,
Have been struggling with getting luxadm to work on an e450 (sol7) with
Qlogic 2200F and an A5200.
I can see only the _front_ disks in format (judging by target #'s). I
wouldn't really care that much about luxadm, but it might give me a clue
on why I am seeing only half the disks (the array is not configured in
split loop).
The following packages are installed:
system QLA2200 QLogic QLA2200 driver
system QLSDMLIB QLogic SDM Library for SNIA 1.0
system QLSDMLIB6 QLogic SDM Library for SNIA 1.0
system SUNWfctl Sun Fibre Channel Transport layer
system SUNWfctlx Sun Fibre Channel Transport layer (64 bit)
system SUNWifp Sun Fibre Channel Arbitrated Loop Device Driver
system SUNWifpx Sun Fibre Channel Arbitrated Loop Device Driver
(64-bit)
system SUNWluxd Sun Enterprise Network Array sf Device Driver
system SUNWluxdx Sun Enterprise Network Array sf Device Driver
(64-bit)
system SUNWluxdx.2 Sun Enterprise Network Array sf Device Driver
(64-bit)
system SUNWluxl Sun Enterprise Network Array socal Device
Driver
system SUNWluxlx Sun Enterprise Network Array socal Device
Driver (64-bit)
system SUNWluxop Sun Enterprise Network Array firmware and
utilities
system SUNWses SCSI Enclosure Services Device Driver
system SUNWsesx SCSI Enclosure Services Device Driver (64-bit)
system SUNWssad SPARCstorage Array Drivers
system SUNWssadx SPARCstorage Array Drivers (64-bit)
system SUNWssaop SPARCstorage Array Utility
The following patches were applied (all I could find on luxadm on
sunsolve)
107292-09 107469-09 107473-07 107474-01 109117-05
bash-2.02# luxadm probe -p
No Network Array enclosures found in /dev/es
bash-2.02# ls /dev/es
bash-2.02#
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:21 EDT