From: Neil Hunt (grover@huntcorp.com.au)
Date: Tue Mar 16 2004 - 19:58:50 EST
G'day,
Extra info:
tape device is /dev.rmt/0cbn
robot is : /dev/sg/c1t0l0
Neil
-------------------------------------------------------------------
G'day folks,
I realise this is not Sun specific, but it is running on a Solaris 8
V880. I have sent this email twice to the veritas-bu list and have
received zero replies thus far.
I'm having an issue with my recently upgraded NBU installation. I have
set it to perform a DB backup "after each successful backup schedule".
I have no issues with the backup itself, but at completion, it will not
unload the tape from the DLT8000 (in an L9), in order to perform the DB
backup.
This has been like this since I upgraded about 3 weeks ago from 3.4.
Does anyone have any suggestions as to what to look at? I have enabled
all logging, and cannot see anything obvious.
The DB backups work when I run manually.
Thanks.
Neil Hunt
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
----- End forwarded message -----
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:17 EDT