From: Jeremy Ahl (Jeremy.Ahl@vivista.co.uk)
Date: Mon Mar 08 2004 - 05:12:38 EST
Hi
Apologies if this has been asked before, but I haven't seen it anywhere.
V880 using RSC 2.2.
When I telnet to the rsc, and type console nothing happens. ~. returns me to
the rsc prompt.
The only thing that fixes it is to reset the V880. It seems to then be OK
for the first time you use it, then hangs again.
RSC is patched to 111500-09
Thanks in advance
Jez
**********************************************************************
The information contained in this e-mail message is intended
only for the individuals named above. If you are not the
intended recipient, you should be aware that any
dissemination, distribution, forwarding or other duplication
of this communication is strictly prohibited. The views
expressed in this e-mail are those of the individual author
and not necessarily those of Vivista Limited.
Prior to taking any action based upon this e-mail message
you should seek appropriate confirmation of its authenticity.
If you have received this e-mail in error, please immediately
notify the sender by using the e-mail reply facility.
**********************************************************************
_____________________________________________________________________
This message has been checked for all known viruses on behalf of Vivista by MessageLabs.
http://www.messagelabs.com or Email: mailsweeper.info@vivista.co.uk
Vivista formerly Securicor Information Systems for further information http://www.vivista.co.uk
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:12 EDT