From: Chris Garaffa (chris@nilzero.com)
Date: Sat Feb 07 2004 - 22:27:47 EST
Hi all,
I recently was given a Sun E250. In the process of installing Aurora
Linux (that's a story for another day), I unfortunately issued the
power-off command at the OBP prompt. This is unfortunate because on the
machine, there isn't much left of the front panel remaining. I found
the documentation on Sun's site which says "Turn the front panel
keyswitch to the Power-on... position," but there's no keyswitch. I
have that section (the upper) of the front panel, and coming from the
machine is the part that the keyswitch would go into. Bug again, I
don't have a keyswitch.
Is there anything I can do to get this machine to turn on again?
Thanks in advance, and I will summarize.
-- Chris Garaffa chris@nilzero.com _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:00 EDT