From: Joseph Muscat (musdanjo@nextgen.net.mt)
Date: Thu Jan 29 2004 - 07:53:37 EST
Dear Sun Managers
On the issue here below mentioned I have solved it by removing and puuting back the memory. The server seems ok now. I shall be putting a summary sooner or later on sunmangers. I would like just to ask just something small. What does <1f> mean. Is it a failure or some other code
Regards
Daniel
---------- Original Message ----------------------------------
From: "Joseph Muscat" <musdanjo@nextgen.net.mt>
Reply-To: <musdanjo@nextgen.net.mt>
Date: Tue, 27 Jan 2004 15:20:51 +0100
Hi Gurus
I have switched on an E420 (2 CPU 4G Memory) and after itinitialzed memory it hanged. I switched the server to full diag and during diagnosis the following failure was reported
1> <1f> Init Psycho
1> <1f> PIO Read Error, Master Abort Test
1> <1f> PIO Read Error, Target Abort Test
1> <1f> PIO Write Error, Master Abort Test
1> <1f> PIO Write Error, Target Abort Test
1> <1f> Timer Increment Test
1> <1f> Init Psycho
1> <1f> Pass-Thru DMA UE ECC Rd Err Lpbk Test
1>STATUS =FAILED
1>TEST =Pass-Thru DMA UE ECC Rd Err Lpbk
TTF =0
PASSES =1
ERRORS =1
SUSPECT=Psycho (Functional) U1701
1>MESSAGE=Psycho ECC Async Fault Stat Reg
addr 000001fe.00000040
exp 001a0000.ff800000
obs 401a0000.ff800000
At first I thought that it was a CPU problem and switched position of the two CPU but the same failure occured on CPU 1. Does anybody know what is the problem
Regards
Daniel
________________________________________________________________
Sent through the WebMail system at nextgen.net.mt
________________________________________________________________
Sent through the WebMail system at nextgen.net.mt
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:55 EDT