From: Danny Daniels (dcd@pop.mainstreet.net)
Date: Thu May 23 2002 - 12:09:42 EDT
> > I have a PC with Hyperterminal hooked up to
> > my LOM console port on my NetraX1. When I apply
> > power the system begins to boot. I would like to
> > be able to break into the PROM monitor (the "OK"
> > prompt). Normally on a Sun keyboard you can hit
> > the L1-A keys. Any idea what the equivalent is
> > from Hyperterminal?
> >
1. Break into the lomlite shell "lom>" during boot
#.
2. from the lomlite shell use the "break" command. This will put you at the
ROM prompt (OK)
lom> break
I hope this helps
-Danny
dcd@pop.mainstreet.net
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:22 EDT