From: Rob Ouellette (rouellet@ebmail.gdeb.com)
Date: Tue Dec 02 2003 - 06:53:12 EST
Hello All,
I received 3 responses to the question, original shown below, for a
recommendation on powering a sun rack 900 without the power distribution
system (PDS) that sun provides. We don't want to install a 220V line. We
want to stay with the standard plug and wall receptacles, since the rack is
not going to be heavily populated.
Responses:
1. One Recommendation against buying a sun rack 900. The PDS is difficult
to install and the rack is not a sturdy as some of the older sun racks.
2. One recommendation to use a PDS that uses a 220V line.
3. One "Good luck".
Thanks everyone!
After we buy, setup and populate a rack, I'll re-post the summary.
-----Original Message-----
Hello All,
We are looking at buying a Sun Rack 900 without the 2,000.00 power
distribution system (PDS). Has anyone found any products ( surge
suppressors, power strips ) that work/fit well with this rack. Does the
solution require any additional mounting hardware?
We do not want to consider any solutions that require the use of a
receptacle other than the standard wall receptacle ( NEMA 5-15 ).
Thanks,
-rob
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:36 EDT