From: John England (john_w_england@yahoo.com)
Date: Mon Nov 24 2003 - 08:00:28 EST
All;
do anyone know of any problems with using mkfile
on a vxfs partition.
when I use the command
mkfile 10000m /usr/local2
which is a vxfs filesystem my freemem
gets used up. The system appears to be
paging correctly but swap is never used.
It takes about 30 seconds for the above command
to bring my 6800 to its knees. I have tried this
on a ufs filesystem and everything works fine.
All software and firmware are up to date.
#sar -r
SunOS s6800rm1b 5.8 Generic_108528-24 sun4u
11/24/03
07:21:22 freemem freeswap
07:21:27 207299 11218154
07:21:32 207710 11240413
07:21:37 206841 11173901
07:21:42 208123 11262759
07:21:47 203197 11195077
07:21:52 171722 11209767
07:21:58 145319 13361289
07:22:03 72428 11147493
07:22:08 30644 11117754
07:22:13 4300 11156765
07:22:18 4030 11156791
07:22:23 4315 11069381
Average 121943 11359588
John
__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:32 EDT