From: Kevin Sindhu (Kevin.A.Sindhu@Mail.AC)
Date: Sat Nov 15 2003 - 01:37:58 EST
Hiya Managers,
On my working ultra 10 (440 Mhz), I recently installed an elite3d-m6
video card and booted up to the console. The m6 card was found (using
show-displays) and it worked for a minute. Then the machine
automatically shut off. No amounts of power cycle would restart the
machine. It got to the point where it found the card and but somehow
any little movement turns the machine off.I've been able to reproduce
this repeatedly and in succession.
Thinking it might just be the seating of the card, I took it out and
put it back in but still have same problem. At times, now when I seat
the card in properly, the machine doesn't even want to turn on. Take
the card out and it starts working. However, the machine works
perfectly with the m3 card. "show-display" from prom works only at
times and again, any small movement around the machine causes it to
shut off. I've in my experience never seen anything like this....and
I'm ^this^ close to tearing my hair off. Could anyone share any
guidance? I'll summarize all replies.
Thanks and Regards,
- A almost-close-to-balding-admin
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:28 EDT