From: Ramesh Edupalli (redupalli.contractor@wwre.org)
Date: Fri Nov 14 2003 - 16:01:14 EST
Hi Gurus,
H/W Sun E4500, with Ultra scsi Controllers. connected to 4 D1000s.
I have 24 disks from 2 D1000s are configured in a disk group. I have created
28 volumes with 7 volumes in 4 disks with stripe-mirror layout. created file
systems and mounted them, I wanted to do a reboot and make sure everything is
fine, then the Problem started.
System did not come up and saying board0 memory error, I switched of the Box
and reseted the memory, then I wanted to distribute the load on scsi
controlles and I/O boards So I chnaged one of the Ultra scsi controller from
board 7 to board 3, and rebooted the box. Strange I had missed 7 of the
volumes. they are not showing in vxprint out put.
What might have happend any clues and how to recover if possible.
OS: Solaris 8 with 108528-19 kernel update patch.
vxvm: Volume Manager 3.5 and vxfs 3.5
Any help is highly appreciated.
Thanks
Ramesh Edupalli
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:28 EDT