SF 280R CPU seeprom format: 0000.0000.0000.0002

From: Tran Lam Anh Cuong (cuong.dcvn@fmail.vnn.vn)
Date: Mon Nov 03 2003 - 09:12:05 EST

• Next message: Timothy Arnold: "Replacing failed disk using disksuite"
• Previous message: Glenn, May (COMFIN, VFS, Consultant): "Solaris 9 Diskless"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Dead Gents,
I'm facing a problem with a SF280R...
When the machine boot, it sometime reports:
-----------------------------------------------------------
CPU seeprom format: 0000.0000.0000.0002
Fatal Error reported by: (Cpu0)
-------------------------------------------------

or

-----------------------------------------------------------
CPU seeprom format: 0000.0000.0000.0002
Fatal Error reported by: (PCI-PBM)
-------------------------------------------------

When running for a while, the same report happens and the machine reboot...

Then, the messages continue many times and the system can not boot.
I have to power-off the machine, then power-on... there's still the message but the machine can boot. (Running for a while the problem happen again)

Pls advise,

Thks,
Cuong
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Timothy Arnold: "Replacing failed disk using disksuite"
• Previous message: Glenn, May (COMFIN, VFS, Consultant): "Solaris 9 Diskless"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:24 EDT