Missing one target in a D1000

From: Dirk Boenning (dirk.boenning@ccf.de)
Date: Mon Nov 03 2003 - 07:32:10 EST

Next message: WC Jones: "Debian Ultrasparc w/KVM PS/2 & Mouse"
Previous message: Gustavo A. Lozano: "Is it possible to conect a PS2 keyboard to a Type 5 connector in the Ultra?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello,

after moving a D1000 to a new machine the target with SCSI ID 10 is
missing. It's not the disk itself for sure (tested by changing disks).

Moving the D1000 back to the old system (Ultra 2 with HBA X1065A) all
12 disks a seen again.

Again to the new system V240 with HBA X6541A and Cable X3832A the
target 10 is missing. Reading Sunsolve I can't find the Cable X3832A
(2m VHDCI to HD68) as supported one. Only the longer ones (X3830A 4m)
are listed. Could this really the problem or any other idea what's
going on..

Thanx in advance for any idea, clue tip...

Dirk.

-- 
CCF AG
Dirk Boenning
Daimlerstrasse 10
D-64347 Griesheim
t. +49 (0)6155/6668-0
f. +49 (0)6155/6668-68
e. dirk.boenning@ccf.de
w. www.ccf.de
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

Next message: WC Jones: "Debian Ultrasparc w/KVM PS/2 & Mouse"
Previous message: Gustavo A. Lozano: "Is it possible to conect a PS2 keyboard to a Type 5 connector in the Ultra?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:24 EDT