From: Milan Matesin (mmatesin@computech.hr)
Date: Thu Oct 23 2003 - 11:05:35 EDT
Hello all,
I find where the problem was: hostname!
If I enter as hostname "dns", the install script wouldn't proceed, so I
tried with "dns01" and it goes on.
I tried with sol 9 8/03 and sol 9 4/03, on both v240 and E450 machines,
same behavior.
So be aware!
Here is output (I changed IP address in output, so my customer won't
complain about privacy):
<---snip--->
You have entered the following values:
Host Name: dns
IP Address: xxx.xxx.3.7
System part of a subnet: Yes
Netmask: 255.255.255.0
Enable IPv6: No
Default Route: Yes
Router IP Address: xxx.xxx.3.100
Name Service: None
Enable Kerberos: No
Time Zone: Europe/Zagreb
Enter 'y' to apply these values and proceed to the next stage of the
installation, or 'n' to return to the beginning and make changes
(y/n): y
Please wait while the system is configured with your settings...
An error has occurred in configuring the system. Please go back and
check your
settings.
<Press ENTER to continue>
<---snip--->
Milan Matesin
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:21 EDT