Mutliple topologies with JNI FCI-1063

From: Steve Mickeler (steve@warning.ca)
Date: Tue Oct 14 2003 - 12:22:14 EDT

• Next message: Ilya Birman: "Unable to Telnet to RSC on all up servers"
• Previous message: Chen, Grace: "Question regarding Jumpstart"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I have 3 JNI FCI-1063's in a 420R and am trying to do the following:

Allow hba0 and hba1 to communicate via a loop

Allow hba2 to communicate via a fabric

I know this can easily be done with the 6410's as I it states various
jnicX entries can be used , but the fca.conf for the 1063 doesnt appear to
allow "per-hba" settings.

Can anyone shed some light on this ?

Thanks.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Ilya Birman: "Unable to Telnet to RSC on all up servers"
• Previous message: Chen, Grace: "Question regarding Jumpstart"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:17 EDT