From: Maverick (mavong@singnet.com.sg)
Date: Thu Jul 31 2003 - 13:21:57 EDT
Hi All,
To apply SUN patches, I will break exsiting sub-mirrors for mirror boot disk
using metadetach.
I have configured OBP boot-device as disk disk1 (disk-primary boot disk,
disk1 - mirror boot disk)
- boot from disk.
- apply SUN patches.
if patches goes smoothly, I can sync back mirror boot disk sub-mirrors using
metattach.
The problem comes when after applying SUN patches, the primary boot disk is
unable to boot-up.
How can I use Disksuite to boot from mirror boot disk and then sync back
with primary boot disk to the state before SUN patches was applied.
Plse HELP.
:)
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:50 EDT